SEBI Grade A Syllabus

 SEBI Grade A Officer Exam comprises of three phases.  

  • Phase I: On-line screening examination consisting of two papers of 100 marks each
  • Phase II: On-line examination consisting of two papers of 100 marks each
  • Phase III: Interview

SEBI Grade A Exam Pattern For Phase I

PaperStreams/ SubjectsMaximum MarksDurationCut off
Paper 1All Streams:  Multiple choice questions on the subjects viz.
1. General Awareness (including some questions related to  Financial  Sector of easy to moderate difficulty level),
2. English   Language,
3. Quantitative Aptitude
4.Test of Reasoning.
10060 minutes30%
Paper 2General Stream:
Multiple choice questions on subjects Commerce, Accountancy, Management, Finance, Costing, Companies Act and Economics.

Legal, Information Technology, Engineering Stream (Civil & Electrical), Official Language stream: Multiple choice questions on Specializedsubject related to the stream.

Research Stream:-
Multiple choice questions on subjects   Economics,   Econometrics,   Statistics, Finance, and Commerce.
10040 minutes40%
Aggregate Cut off40%

SEBI Grade A Phase I Marking Scheme

  • There shall be negative marking of 1/4th of marks assigned to the question for every incorrect answer.
  •  There shall be a cut-off of minimum 30% for Paper 1 (no sectional cut-off shall be there)
  • Candidates would need to secure separate cut-off in each paper as mentioned above as well as an aggregate cut-off marks of 40% in Phase I exam to be shortlisted for Phase II
  • Candidates have to secure separate cut-off in each paper as mentioned above as well as aggregate cut-off marks of 40% in Phase I exam to be shortlisted for Phase II.

SEBI Grade A Mains Exam Pattern (Phase 2)

PaperTopicsMaximum MarksDurationCut off
Paper 1All streams: English (Descriptive Test) to test the drafting skills10060 mins30%
Paper 2General Stream: Multiple choice questions on subjects          Commerce,          Accountancy, Management,  Finance,  Costing,  Companies Act
and Economics.



Legal, Engineering Stream (Civil & Electrical) and Official
Language stream: Multiple choice questions on 
  Specializedsubject related to the stream.



Research Stream:- Multiple choice questions
on subjects     Economics,     Econometrics,
Statistics, Finance, and Commerce.
10040 mins40%
Aggregate Cut off40%

Marking Scheme For SEBI Grade A Phase II

  • There shall be negative marking of 1/4th of marks assigned to the question for Paper 2 in Phase II
    (except IT stream for which details shall be informed in due course).
  • There shall be a cut-off of minimum 30% for Paper 1 and a cut-off of minimum 40% for Paper 2 in
    Phase II.
  •  Candidates would need to secure separate cut-off in each paper as mentioned above as well as
    aggregate cut-off marks of 40% in Phase II exam (weightage of 1/3rd for Paper 1 and 2/3rd for Paper 2)
    to be shortlisted for Phase III.

SEBI Grade A Syllabus For Phase I: Paper I

SEBI Grade A Syllabus Phase I  For Paper I will be common for all the candidates. This will have MCQ’s of 100 marks. Paper I will have four sections:

  • English Language
  • Reasoning Ability
  • Quantitative Aptitude
  • General Awareness (including Financial Awareness)

English Language

  • Error Spotting
  • Column based Fillers and Sentence Connectors
  • Paragraph Completion
  • Sentence Rearrangement
  • Comprehension
  • Fill in the Blanks
  • Passages
  • Synonyms and Antonyms
  • Active and Passive Voice
  • Direct and Indirect Speech
  • Idioms & Phrases etc.

Quantitative Aptitude

  • Data Interpretation
  • Inequalities
  • Number Series
  • Approximation and Simplification
  • Data Sufficiency
  • HCF and LCM
  • Inequality (Quadratic & Quantity based)
  • Profit and Loss
  • Time and work & Pipe and cistern
  • Permutation, Combination & Probability
  • Problem on Ages
  • Work and Time
  • Speed Distance and Time
  • Mensuration
  • Average, Ratio and Proportion etc.

Reasoning Ability

  • Puzzles
  • Seating Arrangements
  • Direction Sense
  • Blood Relations
  • Syllogisms
  • Inequalities
  • Order and Ranking
  • Coding-Decoding
  • Machine Input-Output
  • Alpha-Numeric-Symbol Series
  • Data Sufficiency
  • Number System and Conversions
  • Logical Reasoning etc.

General Awareness

  • Current Affairs
  • Financial Awareness
  • Current Affairs – National & International
  • Budget
  • Awards and Honours
  • Important Financial & Economic News
  • Important Days
  • International & National Organizations
  • Sports
  • Books and Authors
  • Science – Inventions & Discoveries
  • Countries & Capitals etc

SEBI Grade A Prelims (Phase-I) – Paper 2 Syllabus (Stream-Wise)

Syllabus For General Stream

Commerce & Accountancy:

  • Accounting as a financial information system;
  • Accounting Standards with specific reference to Accounting for Depreciation, Inventories, Revenue Recognition, Fixed Assets, Foreign Exchange Transactions, Investments.
  • Cash Flow Statement, Fund flow statement, Financial statement analysis; Ratio analysis;
  • Accounting for Share Capital Transactions including Bonus Shares, Right Shares.
  •  Employees Stock Option and Buy-Back of Securities.
  • Preparation and Presentation of Company Final Accounts.

Management:

  • Management: its nature and scope; The Management Processes; Planning, Organization, Staffing, Directing and controlling; The Role of a Manager in an Organization.
  • Leadership: The Tasks of a Leader; Leadership Styles; Leadership Theories; A successful Leader versus an effective Leader.
  • Human Resource Development: Concept of HRD; Goals of HRD; Performance Appraisal – Potential appraisal and development – Feedback and Performance Counselling – Career Planning – Training and Development – Rewards – Employee Welfare. Motivation, Morale, and Incentives: Theories of Motivation; How Managers Motivate; Concept of Morale; Factors determining morale; Role of Incentives in Building up Morale.
  • Communication: Steps in the Communication Process; Communication Channels; Oral versus Written Communication; Verbal versus non-verbal Communication; upward, downward and lateral communication; Barriers to Communication, Role of Information Technology.
  • Corporate Governance: Factors affecting Corporate Governance; Mechanisms of Corporate Governance.

Finance and Management

(a) Financial System:

  • Money Market, Capital Market
  • Reserve Bank of India- functions, and conduct of monetary policy, Banking System in India, Financial Institutions – SIDBI, EXIM, NABARD, NHB, etc.
  • SEBI – functions, and role
  • Prevention of Money Laundering
  • Know Your Client Framework
b) Financial Markets:

Primary and Secondary Markets (Forex, Money, Bond, Equity, etc.), functions, instruments, recent developments.

(c) General Topics:

  • Risk Management in Financial Sector Page 21 of 25
  • Basics of Derivatives: Forward, Futures, and Swap
  • Changing Landscape of the Financial sector
  • Recent Developments in the Financial Sector, Portfolio Investment, Public Sector Reforms, Disinvestments
  • Financial Inclusion- use of technology
  • Alternate source of finance, private and social cost-benefit, Public-Private Partnership
  • Corporate Governance in the Financial Sector, the role of e-governance in addressing the issues of corruption and inefficiency in the government sector
  • The Union Budget – Direct and Indirect taxes; Non-tax sources of Revenue, GST, Thirteenth Finance Commission and GST, Finance Commission, Fiscal Policy, Fiscal Responsibility and Budget Management Act (FRBM)
  • Inflation: Definition, trends, estimates, consequences, and remedies (control): WPI, CPI – components, and trends

Costing

  • Overview of Cost and Management Accounting – Introduction to Cost and Management Accounting, Objectives and Scope of Cost and Management Accounting.
  • Methods of Costing – Single Output/ Unit Costing, Job Costing, Batch Costing, Contract Costing, Process/ Operation Costing, Costing of Service Sectors.
  • Basics of Cost Control and Analysis – (i) Standard Costing, (ii) Marginal Costing, (iii) Budget and Budgetary Control.
  • Lean System and Innovation:-
    a) Introduction to Lean System
    b) Just-in-Time (JIT)
    c) Kaizen Costing
    d) 5 Ss
    e) Total Productive Maintenance (TPM)
    f) Cellular Manufacturing/ One-Piece Flow Production Systems
    g) Six Sigma (SS)
    h) Introduction to Process Innovation and Business Process Re-engineering (BPR).

Companies Act

The Companies Act, 2013 – Specific reference to Chapter III, Chapter IV, Chapter VIII, Chapter X, Chapter XI, Chapter XII and Chapter XXVII.

Economics

  • Demand and Supply, Market Structures, National Income: Concepts and Measurement, Classical & Keynesian Approach Determination of output and employment, Consumption Function, Investment Function, Multiplier and Accelerator, Demand and Supply for Money, IS-LM, Inflation and Phillips Curve, Business Cycles
  • Balance of Payments, Foreign Exchange Markets, Inflation, Monetary and Fiscal Policy, Non-banking Financial Institutions.

Syllabus For Legal Stream

  • Constitution of India – Preamble, Part I, Part III, Part IV, Part IVA, Part V, Part VI, Part VIII, Part IXA, Part IXB, Part XI.
  • Law of Contracts – Indian Contract Act, 1872 (Chapters I to VI), Specific Relief Act, 1963.
  • Criminal Law – Indian Penal Code, 1860 (Chapters I, II, III, IV, V, VA, VI, IX, XVII); Code of Criminal Procedure, 1973.
  • Law of Evidence – Indian Evidence Act, 1872.
  • Code of Civil Procedure, 1908 – Part I, Part II.
  • Administrative Law and Principles of Natural Justice.
  • Jurisprudence and Interpretation of Statutes
  • Important Latin terms and maxims
  • Law of Torts and Consumer Protection Act, 2019
  • Arbitration and Conciliation Act, 1996 – Part I
  • Transfer of Property Act, 1882 – Chapter III, Chapter IV, Chapter V.
  • Companies Act, 2013 – Chapter I, Chapter II, Chapter III, Chapter IV, Chapter V, Chapter VII, Chapter VIII, Chapter IX, Chapter X, Chapter XI, Chapter XII, Chapter XIII, Chapter XV, Chapter XVI.
  • Securities Laws – SEBI Act, 1992, SC(R) Act, 1956, Depositories Act, 1996.

Syllabus For Information Technology:

Database Concepts

ER‐model. Relational model: relational algebra, tuple calculus, Integrity constraints, normal forms. File organization, indexing (e.g., B and B+ trees), Transactions, and concurrency control.

SQL Queries

Select, view, truncate, delete, update, alter, Inner join, different types of outer joins,, use of aggregate functions, Union, intersection, except, in and exist clauses, nested queries.

Programming Concepts (Java /C C++ )

Program control (iteration, recursion, Functions), Scope of variables, Binding of variables & functions, Parameter passing, Functional and Logic Programming, OOPS Concepts, Inheritance, Class and object, Constructors, Functions, Exception Handling.

Data Analytics Languages (Python / R)

Regex, Slicing, Data reshaping, Dataframes, Dictionaries and Sets, File Management, Classes and Functions, Data Mining, Lists, Importing and exporting data, charts, and graphs.

Algorithms for problem-solving

Tree and graph traversals, Connected components, Spanning trees, Shortest paths; Hashing, Sorting, Searching; Design techniques (Greedy, Dynamic Programming, Divide-and-conquer).

Networking Concepts

ISO/OSI stack, LAN Technologies (Ethernet, Token ring), TCP/UDP, IP, Basic concepts of switches, gateways, and routers, Application layer protocols (DNS, SMTP, POP, FTP, HTTP), Firewalls.

Information & Cyber Security Concepts

Cyber Attacks, Software Development Security, Network Security, Authentication, CIA – Confidentiality, Integrity and Availability, Network Audit, Systems Audit.

Data warehousing

Data Extraction, Data Cleaning, Data Transformation, Data Loading, Metadata, Data Cube, Data Mart, Data Models.

Shell Programming

Shell Scripting Basics, Shell Variables, Shell Script Arguments, If Statement, Loop, Return, Basic UNIX commands

Syllabus For Civil Engineering Stream

Building Materials:

Stone, Lime, Glass, Plastics, Steel, FRP, Ceramics, Aluminium, Fly Ash, Basic Admixtures, Timber, Bricks, and Aggregates: Classification, properties, and selection criteria; Cement: Types, Composition, Properties, Uses, Specifications, and various Tests; Lime & Cement Mortars and Concrete: Properties and various Tests; Design of Concrete Mixes: Proportioning of aggregates and methods of mix design.

Solid Mechanics:

Elastic constants, Stress, plane stress, Strains, plane strain, Mohr’s circle of stress and strain, Elastic theories of failure, Principal Stresses, Bending, Shear, and Torsion.

Structural Analysis:

Basics of the strength of materials, Types of stresses and strains, Bending moments and shear force, the concept of bending and shear stresses; Analysis of determinate and indeterminate structures; Trusses, beams, plane frames; Rolling loads, Influence Lines, Unit load method & other methods; Free and Forced vibrations of single degree and multi-degree freedom system; Suspended Cables; Concepts and use of Computer-Aided Design.

Design of Steel Structures:

Principles of Working Stress methods, Design of tension and compression members, Design of beams and beam-column connections, built-up sections, Girders, Industrial roofs, Principles of Ultimate load design.

Design of Concrete and Masonry structures:

Limit state design for bending, shear, axial compression, and combined forces; Design of beams, Slabs, Lintels, Foundations, Retaining walls, Tanks, Staircases; Principles of pre-stressed concrete design including materials and methods; Earthquake resistant design of structures; Design of Masonry Structure.

Construction Practice, Planning, and Management:

Construction – Planning, Equipment, Site investigation and Management including Estimation with latest project management tools and network analysis for different Types of works; Analysis of Rates of various types of works; Tendering Process and Contract Management, Quality Control, Productivity, Operation Cost; Land acquisition; Labour safety and welfare.

The flow of Fluids, Hydraulic Machines, and Hydro Power:

(a) Fluid Mechanics, Open Channel Flow, Pipe Flow: Fluid properties; Dimensional Analysis and Modelling; Fluid dynamics including flow kinematics and measurements; Flow net; Viscosity, Boundary layer, and control, Drag, Lift, Principles in open channel flow, Flow controls. Hydraulic jump; Surges; Pipe networks.

(b) Hydraulic Machines and Hydropower: Various pumps, Air vessels, Hydraulic turbines – types, classifications & performance parameters; Powerhouse – classification and layout, storage, pondage, control of supply.

Hydrology and Water Resources Engineering:

Hydrological cycle, Ground water hydrology, Well hydrology and related data analysis; Streams and their gauging; River morphology; Flood, drought, and their management; Capacity of Reservoirs.

Water Resources Engineering: Multipurpose uses of Water, River basins and their potential; Irrigation systems, water demand assessment; Resources – storages and their yields; Waterlogging, canal and drainage design, Gravity dams, falls, weirs, Energy dissipaters, barrage Distribution works, Cross drainage works and head-works and their design; Concepts in canal design, construction & maintenance; River training, measurement, and analysis of rainfall.

Environmental Engineering:

(a) Water Supply Engineering: Sources, Estimation, quality standards and testing of water and their treatment; Rural, Institutional and industrial water supply; Physical, chemical and biological characteristics and sources of water, Pollutants in water and its effects, Estimation of water demand; Drinking water Standards, Water Treatment Plants, Water distribution networks.

(b) Waste Water Engineering: Planning & design of domestic wastewater, sewage collection, and disposal; Plumbing Systems. Components and layout of sewerage system; Planning & design of Domestic Waste-water disposal system; Sludge management including treatment, disposal, and re-use of treated effluents; Industrial waste waters and Effluent Treatment Plants including institutional and industrial sewage management.

(c) Solid Waste Management: Sources & classification of solid wastes along with planning & design of its management system; Disposal system, Beneficial aspects of wastes and Utilization by Civil Engineers.

(d) Air, Noise pollution, and Ecology: Concepts & general methodology.

Geotechnical Engineering and Foundation Engineering:

(a) Geo-technical Engineering: Soil exploration – planning & methods, Properties of soil, classification, various tests and inter-relationships; Permeability & Seepage, Compressibility, consolidation, and Shearing resistance, Earth pressure theories and stress distribution in soil; Properties and uses of geo-synthetics.

(b) Foundation Engineering: Types of foundations & selection criteria, bearing capacity, settlement analysis, design and testing of shallow & deep foundations; Slope stability analysis, Earthen embankments, Dams, and Earth retaining structures: types, analysis, and design, Principles of ground modifications.

Surveying and Geology:

(a) Surveying: Classification of surveys, various methodologies, instruments & analysis of measurement of distances, elevation, and directions; Field astronomy, Global Positioning System; Map preparation; Photogrammetry; Remote sensing concepts; Survey Layout for culverts, canals, bridges, road/railway alignment, and buildings, Setting out of Curves.

(b) Geology: Basic knowledge of Engineering geology & its application in projects.

Transportation Engineering:

Highways – Planning & construction methodology, Alignment, and geometric design; Traffic Surveys and Controls; Principles of Flexible and Rigid pavements design.

Tunneling – Alignment, methods of construction, disposal of muck, drainage, lighting, and ventilation.

Railways Systems – Terminology, Planning, designs, and maintenance practices; track modernization.

Harbors – Terminology, layouts, and planning. Airports – Layout, planning & design.

Syllabus For Electrical Engineering Stream

Electrical Materials:

Electrical Engineering Materials, crystal structures, and defects, ceramic materials, insulating materials, magnetic materials – basics, properties and applications; ferrites, ferromagnetic materials, and components; basics of solid-state physics, conductors; Photo-conductivity; Basics of Nanomaterials and Superconductors.

Electric Circuits and Fields:

Circuit elements, network graph, KCL, KVL, Node, and Mesh analysis, ideal current and voltage sources, Thevenin’s, Norton’s, Superposition and Maximum Power Transfer theorems, transient response of DC and AC networks, Sinusoidal steady-state analysis, basic filter concepts, two-port networks, three-phase circuits, Magnetically coupled circuits, Gauss Theorem, electric field and potential due to point, line, plane, and spherical charge distributions, Ampere’s and Biot-Savart’s laws; inductance, dielectrics, capacitance; Maxwell’s equations.

Electrical and Electronic Measurements:

Principles of measurement, accuracy, precision, and standards; Bridges and potentiometers; moving coil, moving iron, dynamometer and induction type instruments, measurement of voltage, current, power, energy and power factor, instrument transformers, digital voltmeters and multimeters, phase, time and frequency measurement, Q-meters, oscilloscopes, potentiometric recorders, error analysis, Basics of sensors, Transducers, basics of data acquisition systems.

Computer Fundamentals:

Number systems, Boolean algebra, arithmetic functions, Basic Architecture, Central Processing Unit, I/O and Memory Organisation; peripheral devices, data representation and programming, basics of Operating system and networking, virtual memory, file systems; Elements of programming languages, typical examples.

Basic Electronics Engineering:

Basics of Semiconductor diodes and transistors and characteristics, Junction and field-effect transistors (BJT, FET, and MOSFETS), different types of transistor amplifiers, equivalent circuits and frequency response; oscillators and other circuits, feedback amplifiers.

Analog and Digital Electronics:

Operational amplifiers – characteristics and applications, combinational and sequential logic circuits, multiplexers, multi-vibrators, sample and hold circuits, A/D and D/A converters, basics of filter circuits and applications, simple active filters; Microprocessor basics- interfaces and applications, basics of linear integrated circuits; Analog communication basics, Modulation, and demodulation, noise and bandwidth, transmitters and receivers, signal to noise ratio, digital communication basics, sampling, quantizing, coding, frequency and time domain multiplexing, power line carrier communication systems.

Systems and Signal Processing:

Representation of continuous and discrete-time signals, Shifting and scaling operations, linear, time-invariant and causal systems, Fourier series representation of continuous periodic signals, sampling theorem, Fourier and Laplace transform, Z transforms, Discrete Fourier, transform, FFT, linear convolution, discrete cosine transform, FIR filter, IIR filter, bilinear transformation.

Control Systems:

Principles of feedback, transfer function, block diagrams, and signal flow graphs, steady-state errors, transforms and their applications; Routh-Hurwitz criterion, Nyquist techniques, Bode plots, root loci, lag, lead and lead-lag compensation, stability analysis, transient and frequency response analysis, state-space model, state transition matrix, controllability and observability, linear state variable feedback, PID and industrial controllers.

Electrical Machines:

Single-phase transformers, three-phase transformers – connections, parallel operation, auto-transformer, energy conversion principles, DC machines – types, windings, generator characteristics, armature reaction and commutation, starting and speed control of motors, Induction motors – principles, types, performance characteristics, starting and speed control, Synchronous machines – performance, regulation, parallel operation of generators, motor starting, characteristics and applications, servo and stepper motors.

Power Systems:

Basic power generation concepts, steam, gas, and water turbines, transmission line models and performance, cable performance, insulation, corona, and radio interference, power factor correction, symmetrical components, fault analysis, principles of protection systems, basics of solid-state relays, and digital protection; Circuit breakers, Radial and ring-main distribution systems, Matrix representation of power systems, load flow analysis, voltage control, and economic operation, System stability concepts, Swing curves, and equal area criterion. HVDC transmission and FACTS concepts, Concepts of power system dynamics, distributed generation, solar and wind power, smart grid concepts, environmental implications, fundamentals of power economics.

Power Electronics and Drives:

Semiconductor power diodes, transistors, thyristors, triacs, GTOs, MOSFETs and IGBTs – static characteristics and principles of operation, triggering circuits, phase control rectifiers, bridge converters – fully controlled and half controlled, principles of choppers and inverters, basic concepts of adjustable speed dc and ac drives, DC-DC switched-mode converters, DC-AC switched-mode converters, resonant converters, high-frequency inductors and transformers, power supplies.

Syllabus For Research Stream 

Economics:

Demand and Supply, Market Structures, National Income, Determination of output and employment, Investment Function, Multiplier and Accelerator, Demand and Supply for Money, IS-LM, Inflation and Phillips Curve, Business Cycles, Inflation, Monetary and Fiscal Policy, Non-banking Financial Institutions.

Public Economics:

Public Goods, Tax & Non-Tax Revenue, Direct & Indirect Taxes, Progressive and non-Progressive Taxation, Incidence and Effects of Taxation, Public expenditure, Public Debt, Public Budget, and Budget Multiplier.

Statistics and Econometrics:

Measures of Central tendency & dispersions, Correlation, Sampling methods, Sampling Distribution, Statistical Inferences, Hypothesis testing, Regression Analysis.

International Economics:

Balance of Payments, Foreign Exchange Markets, Role of International Financial Institutions: BIS, IOSCO, IMF & World Bank.

Financial Markets:

Asymmetric Information, Market Model, Market Efficiency, Primary Market, Secondary Market, Commodity Markets, Mutual Funds, Stock Exchanges, Depositories, Clearing Corporations, Credit Rating Agencies, Corporate Debt Market. Forwards, Futures, Options, Hedging, Speculation, and Arbitrage.

Syllabus For Official Language

1. भारत सरकार की राजभाषा नीतत (Official Language Policy of the Govt. of India) से संबंतित प्रश्न

2. तिन्दी से अंग्रेजी अनुवाद [शब्द / वाक्ांश / वाक् / Terms / Phrases / Sentences]

3. अंग्रेजी से तिन्दी अनुवाद [शब्द / वाक्ांश / वाक् / Terms / Phrases / Sentences]

4. तिन्दी से अंग्रेजी – तवतिक शब्दावली (Legal Terminology)

5. अंग्रेजी से तिन्दी – तवतिक शब्दावली (Legal Terminology) 6. तिन्दी से अंग्रेजी – प्रशासतनक / बैंतकंग / प ंजी बाजार संबंिी शब्दावली (Administrative / Banking / Capital Market Terminology) 7. अंग्रेजी से तिन्दी – प्रशासतनक / बैंतकंग / प ंजी बाजार संबंिी शब्दावली (Administrative / Banking / Capital Market Terminology)

SEBI Grade A Mains (Phase – II) – Paper 1 Syllabus (Common For All)

English Writing Skills Syllabus

The paper on English shall be framed in a manner to assess the writing skills including expression and understanding of the topic including precis writing/ essay writing/ comprehension

SEBI Grade A Mains (Phase – II) – Paper 2 Syllabus

Syllabus For General Stream

The syllabus for general stream is common for both phase and phase under paper 2. You can check the complete topic-wise list above for the idea.

Syllabus For Legal Stream – Paper 2 (Phase-II)

  • Constitution of India – Preamble, Part I, Part III, Part IV, Part IVA, Part V, Part VI, Part VIII, Part IXA, Part IXB, Part XI, Part XII, Part XIII, Part XIV, Part XIVA, Part XX.
  • Law of Contracts – Indian Contract Act, 1872 (Chapters VIII to X), Indian Partnership Act, 1932, Specific Relief Act, 1963.
  • Criminal Law – Indian Penal Code, 1860 (Chapters I, II, III, IV, V, VA, VI, IX, XVII, XXI, XXII, XXIII); Code of Criminal Procedure, 1973.
  • Law of Evidence – Indian Evidence Act, 1872.
  • Code of Civil Procedure, 1908 – Part I, Part II, Part III, Part IV, Part V, Part VII, Schedule I.
  • Administrative Law and Principles of Natural Justice
  • Jurisprudence and Interpretation of Statutes.
  • Important Latin terms and maxims
  • Law of Torts and Consumer Protection Act, 2019
  • Arbitration and Conciliation Act, 1996 – Part I, Part III, Part IV.
  • Transfer of Property Act, 1882 – Chapter III, Chapter IV, Chapter V.
  • Law of Trusts – Parties to a Trust Deed and Duties of Trustees.
  • Corporate Law – Companies Act, 2013 (Chapter I, Chapter II, Chapter III, Chapter IV, Chapter V, Chapter VII, Chapter VIII, Chapter IX, Chapter X, Chapter XI, Chapter XII, Chapter XIII, Chapter XV, Chapter XVI, Chapter XXVII, Chapter XXVIII, Chapter XXIX); Limited Liability Partnership Act, 2008; Insolvency and Bankruptcy Code, 2016 (Part I, Part II)
  • Taxation – General principles, Capital Gains Tax, Securities Transaction Tax.
  • Securities Laws – SEBI Act, 1992, SC(R) Act, 1956, Depositories Act, 1996.

Syllabus For Information Technology Stream 

The syllabus for information technology for paper 2 of mains (phase-II) will be notified by the SEBI authorities in the due course.

Syllabus for Engineering Stream, Research & Official Language

The syllabus for all these streams is common for both phase 1 & 2. You can refer to the above syllabus mentioned for the complete list of topics.

Leave a Comment

Your email address will not be published. Required fields are marked *